2024 Marine Power 5.7L ParPac Base

Current Marine Power 5.7L ParPac 5.7L ParPac

Swipe to View More

Year 2024
Make Marine Power
Model 5.7L ParPac

Year 2024
Manufacturer Marine Power
Model Name 5.7L ParPac
Trim Name Base
Generic Type (Primary) General
Engine Power Horsepower: 325 hp (161 kW) @ 4000 rpm / 196 hp (146 kW) @ 4000 rpm (CNG)
Engine Torque, Maximum 308 lb-ft (418 Nm) @ 1400 rpm (LP) / 283 lb-ft (384 Nm) @ 1600 rpm (CNG)
Displacement 350 cid (5736 CC) / 5.7L
Cylinder Liners Head: Cast Iron | 90 Degree 8-Cylinder
Compression Ratio 9.4:1
Valve train Configuration: Overhead Valves (2 valves per cylinder) | Lifters: Hydraulic Roller
Bore 4.00" (101.60 mm)
Stroke 3.48" (88.39 mm)
Emissions Controls: Positive Crankcase Ventilation
Camshaft Type 5150 Steel Billet

2024 Marine Power 5.7L ParPac

The ParPac is the Marine Power partial engine package. Built using an authentic GM base engine and includes an intake, carburetor, electric fuel pump, and ignition system. Our ParPac engines are held to the same quality standards as our complete engine packages.

ParPacs are ideal for numerous replacement situations. ParPacs are the perfect solution for replacing Pre-Vortec engines with the superior Votec engine. The ParPac solves the problem of matching the intake manifold bolt pattern by providing a new installed intake manifold and carburetor. The ParPac also includes the installed electronic fuel pump as opposed to the Pre-Vortec mechanical fuel pump. Our partial engine packages are built to give you just what you need to get back on the water.

Engine

Engine Power Horsepower: 325 hp (161 kW) @ 4000 rpm / 196 hp (146 kW) @ 4000 rpm (CNG)

Engine Torque, Maximum 308 lb-ft (418 Nm) @ 1400 rpm (LP) / 283 lb-ft (384 Nm) @ 1600 rpm (CNG)

Displacement 350 cid (5736 CC) / 5.7L

Cylinder Liners Head: Cast Iron | 90 Degree 8-Cylinder

Compression Ratio 9.4:1

Valve train Configuration: Overhead Valves (2 valves per cylinder) | Lifters: Hydraulic Roller

Bore 4.00" (101.60 mm)

Stroke 3.48" (88.39 mm)

Emissions Controls: Positive Crankcase Ventilation

Camshaft Type 5150 Steel Billet

Dimensions

Dimensions Flywheel Diameter: 14" (Ring Gear Towards Engine)

Capacities

Oil capacity Pan: 5.5 Quarts (with filter)

Features

Features Main Bearing Caps: Cast iron GM232-M | Firing Order: 1 – 8 – 4 – 3 – 6 – 5 – 7 – 2 | Engine Orientation: Longitudinal | Connecting Rods: Forged - SAE 1141

Construction Material Block: Cast Iron GM232-M | Crankshaft: Nodular Iron

Warranty

Warranty 1 Year Limited (Commercial 90 day)